3NEO


POMDI – Herramientas de Diamante SA – leading business in the manufacturing of diamond tools for industrial use – presents its revolutionary technology 3NEO® that will change the wearing habits of the wheels and diamond products to work with glass.

RECOMMENDATIONS FOR USE


USERS MOUNTING A GRINDING WHEEL WITH THE PATENTED 3NEO® SYSTEM FOR THE FIRST TIME ARE RECOMMENDED TO FOLLOW THE STEPS INDICATED BELOW:

  1. UNPACK THE 3NEO® SHANK.
  2. THOROUGHLY CLEAN THE SURFACE TO WHICH THE SHANK WILL BE ATTACHED AND APPLY A WATER-RESISTANT GREASE TO PREVENT BUILD-UP OF GLASS RESIDUE. POMDI RECOMMENDS USING BRUGEROLAS JET-70 GREASE.
  3. ATTACH THE 3NEO® SHANK TO THE MACHINE AS IF IT WERE A COMPLETE GRINDING WHEEL.
  4. APPLY A WATER-RESISTANT GREASE TO THE SURFACE OF THE SHANK TO WHICH THE 3NEO® GRINDING RING WILL BE ATTACHED.
  5. ATTACH THE 3NEO® GRINDING RING TO THE SHANK, WHERE IT WILL BE HELD IN PLACE BY POMDI’S PATENTED MAGNETIC SYSTEM.
  6. ONCE THE 3NEO® SYSTEM IS ASSEMBLED, SEAL THE EXTERNAL JOIN BETWEEN THE SHANK AND THE GRINDING RING WITH A WATER-RESISTANT GREASE TO PREVENT GLASS RESIDUE PENETRATING BETWEEN THE 3NEO® COMPONENTS AND TO ENSURE THAT THIS SURFACE IS KEPT AS CLEAN AS POSSIBLE READY FOR 3NEO® GRINDING RING CHANGEOVER.
  7. ONCE THE GRINDING WHEEL HAS BEEN ALIGNED AND ADJUSTED IN THE MACHINE, IT IS READY FOR USE.

 

USERS REPLACING A WORN 3NEO® GRINDING RING ARE RECOMMENDED TO FOLLOW THE STEPS INDICATED BELOW:

  1. REMOVE THE WORN 3NEO® GRINDING RING BY LEVERING IT OUT USING A SLOTTED SCREWDRIVER. THIS WILL DEACTIVATE THE MAGNETIC FIELD, FREEING THE 3NEO® GRINDING RING READY FOR REPLACEMENT.
  2. THOROUGHLY CLEAN THE SURFACE OF THE 3NEO® SHANK TO WHICH THE NEW 3NEO® GRINDING RING WILL BE ATTACHED.
  3. ONCE CLEAN, APPLY A WATER-RESISTANT GREASE TO THE SURFACE OF THE SHANK TO WHICH THE 3NEO® GRINDING RING WILL BE ATTACHED. POMDI RECOMMENDS USING BRUGEROLAS JET-70 GREASE.
  4. ATTACH THE 3NEO® GRINDING RING TO THE SHANK, WHERE IT WILL BE HELD IN PLACE BY POMDI’S PATENTED MAGNETIC SYSTEM.
  5. ONCE THE 3NEO® SYSTEM IS ASSEMBLED, SEAL THE EXTERNAL JOIN BETWEEN THE SHANK AND THE GRINDING RING WITH A WATER-RESISTANT GREASE TO PREVENT GLASS RESIDUE PENETRATING BETWEEN THE 3NEO® COMPONENTS AND TO ENSURE THAT THIS SURFACE IS KEPT AS CLEAN AS POSSIBLE READY FOR 3NEO® GRINDING RING CHANGEOVER.
  6. ONCE THE GRINDING WHEEL HAS BEEN ALIGNED AND ADJUSTED IN THE MACHINE, IT IS READY FOR USE.

 

FURTHER INFORMATION:      

http://www.youtube.com/v/WDoAZUeC9vA&hl=en&autoplay=1

http://www.youtube.com/v=WbsbgBCtR2U=en&autoplay=1

 

HAZARDS AND PRECAUTIONS

The magnets produce a constant magnetic field. Therefore, in all cases:

 USE AND/OR HANDLING OF PERMANENT MAGNETS IS NOT ADVISED FOR PEOPLE WITH PACEMAKERS.

■ FOR SAFETY REASONS, PEOPLE WITH FERROMAGNETIC METAL IMPLANTS SHOULD REMAIN A MINIMUM DISTANCE OF 2 METRES AWAY FROM THE MAGNET.

WARNINGS